Do You or a Member of Your Family Suffer From Allergies or Other Respiratory Problems?

What is REALLY circulating through your home?
Pollen, Pet Hair, Dust Mites, Cigarette Smoke, Dirt, carpet fibers

Duct Cleaning Could Be The Healthiest Home improvement Investment You Will Ever make for your Business or home.

Duct Cleaning Not Only Gets You a Healthier House it Saves You Money.  A Clean Heating and Cooling System Runs More Efficient!

Red Hot Maintenance uses high-performance air duct cleaning equipment and specialty tools that physically remove dirt, debris and other contaminants from commercial and residential ductwork systems. These exceptionally portable, HEPA-filtered air duct cleaning vacuums are designed to clean HVAC duct systems more efficiently.
Compared to clumsy van or truck-mounted units, Red Hot's portable Power vacuums offer exceptional flexibility and portability needed to access and clean air handling systems on the first floor or the fifty-first floor. Plus, true HEPA filters with 99.97%-rated efficiency or greater ensure that only “hospital grade” pure air is released back into the building.

We also clean Dryer Vents

Source Removal and Capture Provides Complete Cleaning and Decontamination 
of Air Ducts

The definition of source removal duct cleaning using a patented HEPA-AIRE cleaning process is as follows:

1. Red Hot cleans the air conveyance system Compressed Air Tools that dislodge dirt and other contaminants from the ductwork and other HVAC components.
2. We use a powerful  HEPA-filtered Portable Power Vacuum to place the section of the duct system being cleaned under negative pressure, pull dislodged contaminants out of the duct system and capture them.

A conventional HVAC duct system consists of a supply system of ducts to carry heated or cooled air from the furnace/air conditioner (air handler) to various parts of the home or building, and a return duct system to bring fresh air back to the air handler to be heated or cooled again. The supply network consists of main ducts, which carry air to smaller branch runs, which in turn carry air to the desired locations. The return network works in reverse.

State-of-the-Art Source Removal Duct Cleaning Process

Red Hot's HEPA-AIRE process utilizes an Abatement HEPA-AIRE Portable Power Vac in tandem with a specially designed AIRE-SWEEP Portable Air Compressor and Agitation Tools for efficient state-of-the-art source removal duct cleaning. This method enables professional duct cleaners to remove contaminants from all parts of the duct system, regardless of location or type of duct. Yet it is simple to perform and requires only a limited amount of access holes. Here’s how it works:

1. The supply and return networks are “zoned,” or separated, so they can be cleaned independently. This is typically done by removing the furnace filter, inserting it into a plastic bag and reinserting it into the furnace.
2. An access hole is cut into the supply plenum and the flex duct from the HEPA-AIRE Vacuum inlet is connected to the plenum with a quick-connect attachment collar. The powerful vacuum creates high velocity air movement within the supply ductwork to transport loosened dirt and contaminants out of the ductwork and into the vacuum's filtration/collection system.
3. Each branch is cleaned separately starting with the branch farthest from the vacuum. The register and boot areas are blasted with compressed air from the AIRE-SWEEP Compressor using the special air booster gun to push any dirt or debris into the branch run.
4. The branches are then cleaned by feeding the Forward AIRE-SWEEP Assembly down each branch run to push dirt and debris forward into the main run.
5. Agitation devices are used when needed to dislodge caked on debris from inside duct surfaces.
6. The main duct run is then cleaned. First, one-inch diameter access holes must be cut into the duct every 25 feet. Then, the Agitation Devices and an AIRE-SWEEP Assembly are used to dislodge debris accumulated on surfaces. The loosened debris is pulled or pushed toward the HEPA-AIRE Portable Power Vacuum and captured in its multi-stage filtration/collection system.
7. Once the supply side of the system has been completely cleaned, the return duct system is cleaned using the same method.
8. Once the entire cleaning process is completed, all access holes are completely closed with the efficient plugs and cover plates are installed over the access holes.

Dryer Vent Cleaning

Prevent Vent fires and improve your Dryers Drying efficiency which translates to saving energy dollars.

Unlike the dishwasher or clothes washing machine, the dryer needs a little ongoing maintenance to keep it in safe, proper working condition. How does a clothes dryer work? The way your dryer works is pretty simple - it spins clothes around in hot air while an exhaust vent sends damp air outside. A round, flexible exhaust tube connects to the back of your dryer and then to a duct in the wall that leads somewhere outside -- so all the hot, moist air coming out of the dryer ends up outside. As your heated clothes tumble in the hot air, lint (tiny bits of the cotton or other fibers that make up your clothing) comes off the fabric and most of it gets caught in the lint trap as the exhaust air passes through it. The lint trap is usually accessed either inside the dryer door or on top of the dryer -- it usually looks like a plastic or wire screen. Whatever gets past the lint trap goes out the exhaust vent and duct and either clings to the sides of the tube (it is wet with condensation and can be sticky) or blows out the exhaust vent outside. 

Call us today to schedule an appointment 603.627.6227!